Building new energy system

1.Revolutionary Concept of New Energy System Application:

New Energy Supply System for Building is a revolutionary new application concept that WinPower brings you. Despite of wide application in the fields such as street lighting, scenery lighting, communication relay station, military camp, education & experiment, weather forecasting, fishing & boating, field surveillance and so on, it’s a totally initiative application in commercial and residential buildings. It enables new energy to every household swiftly, and open a new era for renewable energy indeed.

2. Proposals for New Energy System Configuration

The example is based on 2 lamps every story of one 8-story building, totaling 16 lamps, and each is rated power at  6-10w LED or LVD energy saving lamps; Each lamp is assumed within 20 minutes on per night, so total daily  power consumption is 0.048kwh, hence the suggested system configurations are as follows:

1.Configuration Proposal 1 (Wind & Solar Hybrid System)

① Wind Turbine: 300W/24V        1 set

②Solar Panel: 70W/24V         2 pcs

③Controller: wind 300w +  solar 70w/24v     1 set

④Battery : 100AH/12V      2 sets

⑤Tower: Guy cable type, 5M height      1 set

Speciality : 7-10 days of lighting ensured, even there is no wind or solar.

2.Configuration Proposal II (Wind Generating System)

①Wind Turbine: 300W/24V    1 set

②Controller: Mono type (of wind), 300W/24V       1 set

③Battery : 100AH/12V      2 sets

④Tower: Guy cable type, 5M height          1 set

Features: 6 days lighting ensured, even under bad wind conditions.

★Remark：If the customer need on-grid system ,we can mate according to their requirements.

1.1spare parts sheet

部件	零件名称	数量	备注
Generator assembly(all the parts are in the same carton	blade	3pcs
	rear control	1pcs
	Hexagon bolt M10×30	4 sets	Including flat gasket, spring washer,nuts
	Panhead bolt M6*58 and M6	2sets	to conncect tail board and rear cover
Solar panel and its frame	Round headed bolt M6×30
battery	100AH×2	1set
controller		1pcs
Tower and tower base	guy tower	1pcs
	tower base	1pcs
	vibration damper plate	1pcs
	noise-reducing rubber	1
	pin roll
	M12×40 bolt	8
Guy and spare parts.	guy base	4pcs
	steel wire rope D8	27 meters
	U shape unload screw M8	4个 4pcs
	rope cramp M8		4 rope cramp for each steel wire rope
	Rigging screw M8	4pcs

All the upper bolt ,screw 、spring washer 、are stainless steel ，after “+” are all spare parts.

 

Effect drawing of installation